Update your Samsung Galaxy S3 Neo I9300I with the latest Android Kitkat Stock firmware.Company has released this firmware some day back via KIES and OTA update,if your region don’t shows the update then just follow this simple manual guide to Update Samsung Galaxy S3 Neo with Android 4.4.4 I9300IXXUBNH3 KitKat Official ROM.It comes with some minor bug fixes along with performance improvement,XXUBNH3 comes with the awesomeness of Android 4.4.4 Kitkat, so make sure you follow the procedure correctly and update your device with the latest Official Android Firmware.
You can easily flash this firmware on your device by just following the simple steps given below, but before we start this process, make sure you know what you are doing.
* Disclaimer:
The autor of this site are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
*Samsung Galaxy S3 Neo I9300I USB DRIVERS.
Check your Computer first,before starting this process and make sure all the Required Drives are installed on your PC. If you don’t have, you can easily find it on Google.
*BACKUP YOUR DEVICE:
After the USB Drivers check, make sure you make a backup for your important data for safe side.
•Backup your Apps.
•Backup your APN Settings: GPRS, 3G, MMS Settings,etc.
•Backup your Contacts, Gmail and Google Data using Google Sync.
•Backup your SMS, Messages even WhatsApp Messages.
If you are using an Official firmware and Updating your device to another Official Update, then you can use Samsung KIES for backup.For Custom ROM users, make sure you create a complete backup of your device.
÷SOME EXTRA TIPS
Make your you enable USB debugging on your device, for that Go to settings>Developer options>Check USB debugging.
Charge your device before stating this process, at-least 80-85% to make sure your device survive till the process ends.
Now let’s begin the process to update your Samsung Galaxy S3 Neo I9300I with XXUBNH3 Android 4.4.4 Official Firmware.
÷IMPORTANT POINTS:
This guide is only for Installing XXUBNH3 Android 4.4.4 on Samsung Galaxy S3 Neo I9300I,don’t try on other devices.
This process will Wipe all your Data.So make a Backup first.
Do it on you own risk and follow the steps carefully.
You can easily flash this firmware on your device by just following the simple steps given below, but before we start this process, make sure you know what you are doing.
* Disclaimer:
The autor of this site are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
*Samsung Galaxy S3 Neo I9300I USB DRIVERS.
Check your Computer first,before starting this process and make sure all the Required Drives are installed on your PC. If you don’t have, you can easily find it on Google.
*BACKUP YOUR DEVICE:
After the USB Drivers check, make sure you make a backup for your important data for safe side.
•Backup your Apps.
•Backup your APN Settings: GPRS, 3G, MMS Settings,etc.
•Backup your Contacts, Gmail and Google Data using Google Sync.
•Backup your SMS, Messages even WhatsApp Messages.
If you are using an Official firmware and Updating your device to another Official Update, then you can use Samsung KIES for backup.For Custom ROM users, make sure you create a complete backup of your device.
÷SOME EXTRA TIPS
Make your you enable USB debugging on your device, for that Go to settings>Developer options>Check USB debugging.
Charge your device before stating this process, at-least 80-85% to make sure your device survive till the process ends.
Now let’s begin the process to update your Samsung Galaxy S3 Neo I9300I with XXUBNH3 Android 4.4.4 Official Firmware.
÷IMPORTANT POINTS:
This guide is only for Installing XXUBNH3 Android 4.4.4 on Samsung Galaxy S3 Neo I9300I,don’t try on other devices.
This process will Wipe all your Data.So make a Backup first.
Do it on you own risk and follow the steps carefully.
*How to Update Samsung Galaxy S3 Neo I9300I With XXUBNH3 Android 4.4.4 Official Firmware:
1- First Download XXUBNH3 Android 4.4.4 Firmware and Odin_v3.09 on your computer.
2-Extract the zip file and open Odin.
3-Turn off your phone.
4-Start your device in Download Mode by pressing Home+Volume Down+ power button simultaneously.
5-Once in Download mode connect your phone to your Computer using original USB cable and wait till the ID:COM section turn blue/yellow in the Odin.
6-Now select the files that you have downloaded.
7-Click on ‘PDA’ and select file named ‘CODE’Click on ‘Phone’ and select file named ‘MODEM’(Ignore if not such file found).
8-Click on ‘PIT’ and select the .pit file. (Ignore if not found).
9-Don’t forget to Enable Auto Reboot and F.Reset in Odin.Enable “Re-Partition” option only if you are using .PIT file.Click on “AP” / “PDA” and select the firmware file.
10-Click on “Start” and wait till the process ends, it will take around 4-5 minutes to complete.
You have successfully Installed XXUBNH3 Android 4.4.4 Kitkat Official Firmware on your Samsung Galaxy S3 Neo I9300I.If your device don’t start properly or stuck in Boot Loop, then just turn it off, remove the battery and re-insert it.
Use The Comment Section And Don’t Forget To Share This post With Your Friends & your Social World
Best regards …©